Fort Wayne's Epoxy & Polyaspartic Basement Floor Coating Specialists.

Turn your unfinished concrete basement into a clean, usable space. Moisture-resistant polyaspartic coatings installed in one day with a lifetime warranty.

Contact Form – Wagoner's Polyaspartic
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Your Basement Floor Is Working Against You.

Bare concrete is porous. It absorbs moisture, holds dust, and makes the whole space feel damp and uninviting. In Indiana, where humidity swings are significant, an uncoated basement floor is constantly pulling moisture up from the ground and releasing it into the air above.

A polyaspartic coating seals the concrete completely. Moisture cannot penetrate the surface. Dust stops being generated. The floor becomes easy to clean and maintain. The space transforms from a storage area you avoid to a room you actually use.

Whether you are finishing a basement for a home gym, workshop, recreation room, or additional living space, the floor is the foundation of the project. Get it right first.

Every Interior Concrete Floor We Coat

Basement Floors

Finished or unfinished. Gym, workshop, rec room, storage, or full living space. We coat them all with the same process and the same lifetime warranty.

Laundry Rooms

Laundry room floors take water, detergent, and foot traffic daily. A coated floor is easy to wipe down and resists staining from spills and overflows.

Utility and Mechanical Rooms

Furnace rooms, water heater areas, and utility spaces benefit from a sealed floor that is easy to clean and does not generate concrete dust around equipment.

Home Gyms

Rubber mats over bare concrete still allow moisture and dust to accumulate underneath. A coated floor eliminates that problem and gives you a clean, professional-looking gym space.

What We Check Before We Coat Your Basement Floor

Moisture is the most common reason a basement floor coating fails. We test every floor with a calcium chloride or relative humidity test before we start. If moisture vapor emission is within acceptable limits, we can proceed with confidence.

If you have active water intrusion, standing water after rain, or visible efflorescence on the walls, those issues need to be resolved before any coating is applied. We will tell you honestly what we find and what needs to happen first. We do not coat floors that are not ready for coating.

Polyaspartic has better moisture tolerance than standard epoxy, which is one reason we use it on basement floors. But no coating is a substitute for proper waterproofing when active water intrusion is present.

4.9 Stars from 114+ Reviews

Fort Wayne’s highest-rated floor coating company on Google.

"Our basement went from a dusty storage space to a room we actually use. The coating is flawless and the crew was in and out in one day."
Rachel G.
April 2024
"They coated our basement floor and it completely transformed the space. No more dust, easy to clean, and it looks great. Highly recommend."
Dan W.
February 2024
"Had moisture concerns but they tested everything first and gave us an honest assessment. The floor came out perfect and has stayed that way."
Amy K.
November 2023

How We Coat a Basement Floor

01

Moisture Testing and Assessment

We test the floor for moisture vapor emission and inspect for any cracks, divots, or surface issues that need to be addressed before coating begins.

02

Diamond Grinding and Surface Prep

The concrete is ground with diamond tooling to remove any existing sealers, open the pores for bonding, and level any high spots. Cracks are filled and repaired.

03

Base Coat and Flake or Color Application

The base coat is applied and your chosen color flake or solid color is broadcast into the wet coat. Non-slip additive is included in every interior floor coating.

04

Polyaspartic Topcoat Seal

A clear polyaspartic topcoat seals the floor, locks in the color, and provides the moisture resistance and durability the floor needs for years of use.

Real Basement Floor Transformations in Fort Wayne

Drag the slider to see the before and after. These are actual jobs we’ve completed in the Fort Wayne area.

[before_after_section]

What Does a Basement Floor Coating Cost?

Most basement floor coating jobs in the Fort Wayne area range from $1,500 to $3,500 depending on square footage and the condition of the concrete. See our full cost guide or request a free quote for an exact number.

Common Questions About Polyaspartic Coatings

Can you coat a basement floor that has moisture issues?

We test every floor for moisture before we start. If moisture levels are within acceptable range, we can proceed. Polyaspartic coatings have better moisture tolerance than standard epoxy, but active water intrusion needs to be addressed before any coating is applied.

Will the coating hide cracks in my basement floor?

Minor surface cracks are filled and addressed during surface prep. The coating will cover them and prevent them from worsening. Structural cracks that indicate foundation movement are a different issue and should be evaluated by a foundation specialist first.

How long does a basement floor coating take to install?

Most basement floor coatings are completed in one day. You can Walk on floors in 24 hours, Park on floor in 48 hours

Is a coated basement floor safe to walk on when wet?

Yes. We add a non-slip additive to every interior floor coating at no extra charge. The texture provides grip even when the floor is wet.

What does a basement floor coating cost in Fort Wayne?

Most basement floor coating jobs in the Fort Wayne area range from $1,500 to $3,500 depending on square footage and condition. We provide free, no-obligation quotes.

Serving Northeast Indiana

Wagoner’s Polyaspartic coats basement and interior floors across Fort Wayne and within a 50-mile radius of Northeast Indiana.

We serve all communities within 50 miles of Fort Wayne, IN.

Get a Free Basement Floor Quote.

Tell us about your project and we will get back to you within one business day with a free, no-obligation estimate. We test every floor before we start so there are no surprises.

Contact Form – Wagoner's Polyaspartic
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

What to Read Next

Garage Floor Coatings

Everything you need to know about coating your garage floor in Fort Wayne.

Patio and Outdoor Floor Coatings

UV-stable coatings for patios, pool decks, and outdoor concrete surfaces.

Polyaspartic Floor Coatings

Why polyaspartic outperforms traditional epoxy on every measure.

Contact Form – Wagoner's Polyaspartic
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.