- Home
- Residential
- Patio & Outdoor Floor Coatings
Fort Wayne's Patio & Outdoor Concrete Coating Specialists.
UV-stable polyaspartic coatings for patios, pool decks, and outdoor concrete. Non-slip, weather-resistant, and backed by a lifetime warranty. Installed in one day.
- UV-Stable Formula
- Lifetime Warranty
- Non-Slip Additive Included
- Why Coat Your Patio
Bare Concrete Is Not Designed for Indiana Outdoor Use.
Outdoor concrete in Indiana takes a beating. Freeze-thaw cycles crack and spall the surface. UV exposure fades and degrades standard sealers. Rain, humidity, and pool chemicals stain and erode unprotected concrete over time.
A polyaspartic outdoor coating changes all of that. The coating is flexible enough to move with the concrete through freeze-thaw cycles without cracking. The UV-stable formula will not yellow or fade in the sun. Non-slip aggregate is added to every outdoor coating so the surface is safe when wet.
The result is a patio or pool deck that looks better, lasts longer, and requires almost no maintenance compared to bare or painted concrete.
- Where We Work Outdoors
Every Outdoor Surface We Coat
Patios and Backyard Concrete
Standard poured or stamped concrete patios. We coat them in your choice of color and finish, with non-slip aggregate for safe outdoor use.
Pool Decks
Pool deck coatings need to handle constant water, pool chemicals, and bare feet. Our non-slip polyaspartic coatings are designed for exactly this environment.
Walkways and Driveways
Concrete walkways and driveways benefit from a sealed surface that resists oil, salt, and weather damage while looking clean and finished year-round.
Porches and Covered Outdoor Spaces
Front porches and covered outdoor areas get foot traffic and weather exposure. A coated surface is easy to sweep, easy to clean, and looks sharp year-round.
- Built for Indiana
Why Standard Epoxy Fails Outdoors in Indiana
Standard epoxy coatings are rigid. When Indiana temperatures swing from below zero in January to 90 degrees in July, the concrete expands and contracts. A rigid coating cannot flex with that movement and eventually cracks, chips, and delaminates.
Polyaspartic coatings are formulated to be flexible. They move with the concrete rather than against it. This is the primary reason we use polyaspartic for all outdoor applications in this region, and why our outdoor coatings carry the same lifetime warranty as our indoor work.
Standard epoxy also yellows and fades in UV exposure within one to two seasons. Polyaspartic topcoats are UV-stable and will hold their color and gloss for years of outdoor exposure.
- Google Reviews
4.9 Stars from 114+ Reviews
Fort Wayne’s highest-rated floor coating company on Google.
- The Process
How We Coat an Outdoor Concrete Surface
01
Surface Assessment and Prep
We inspect the surface for cracks, spalling, and any existing sealers that need to be removed. Outdoor concrete often needs more prep work than interior floors due to weathering and prior treatments.
02
Diamond Grinding and Crack Repair
The surface is ground to remove existing sealers and open the concrete for bonding. Cracks and divots are filled. The goal is a clean, uniform surface before any coating is applied.
03
Base Coat and Color Application
The base coat is applied in your chosen color. Non-slip aggregate is broadcast into the wet coat on every outdoor surface. No exceptions.
04
UV-Stable Polyaspartic Topcoat
A UV-stable polyaspartic topcoat seals the floor, locks in the color, and provides the flexibility and weather resistance needed for outdoor use in Indiana's climate.
- Before & After
Real Patio & Outdoor Floor Transformations
Drag the slider to see the before and after. These are actual outdoor floor coating jobs we’ve completed in Northeast Indiana.
- Pricing
What Does an Outdoor Floor Coating Cost?
Most patio and outdoor coating jobs in the Fort Wayne area range from $1,200 to $3,000 depending on square footage and surface condition. See our full cost guide or request a free quote for an exact number.
- FAQ
Common Questions About Outdoor Floor Coatings
Yes. Polyaspartic coatings are flexible and handle freeze-thaw cycles better than standard epoxy, which can crack and delaminate when concrete expands and contracts. The coating is designed for outdoor use in climates like Indiana’s.
No. We add a non-slip aggregate to every outdoor coating at no extra charge. The texture provides grip even when the surface is wet from rain or a pool splash.
Polyaspartic topcoats are UV-stable and will not yellow or fade the way standard epoxy does. The color you choose will remain consistent for years of outdoor exposure.
Minor surface cracks are filled during surface prep. The coating will cover them and prevent them from worsening. Significant structural cracks or heaving from tree roots or settlement may need to be addressed first.
Most patio and outdoor coating jobs in the Fort Wayne area range from $1,000 to $3,000 depending on square footage and surface condition. We provide free, no-obligation quotes.
- Where We Work
Serving Northeast Indiana
Wagoner’s Polyaspartic coats patios and outdoor floors across Fort Wayne and throughout Northeast Indiana.
We serve all communities within 50 miles of Fort Wayne, IN.
- Free Quote
Get a Free Patio and Outdoor Coatings Floor Quote.
Tell us about your project and we will get back to you within one business day with a free, no-obligation estimate. We install in one day on most outdoor jobs.
- One-day installation on most jobs
- Lifetime warranty on every coating
- Non-slip additive included at no extra charge
- Licensed and insured in Indiana
What to Read Next
- Residential
Garage Floor Coatings
Everything you need to know about coating your garage floor in Fort Wayne.
- Residential
Basement and Interior Floor Coatings
Moisture-resistant coatings for basements, laundry rooms, and interior concrete.
- Residential
Polyaspartic Floor Coatings
Why polyaspartic outperforms traditional epoxy on every measure.
